Install Frame Sections

1) Measure and saw the nine 1" x 3" frame beams.

  • Two 44" vertical beams

  • Two 54" back beams

  • Two 29" front beams

  • Three 33" roof beams

2) Saw one side of the front beams to a 45 degree angle.


3) Predrill and wood glue the 3 frame sections together. Using one roof beam with each of the two other beams.

4) At 6.5" from end of pallet, mount the vertical beam section straight up.

5) At 16" from the other end of the pallet, mount the front support beam section at a 45° angle.

6) Finally, mount the back support beam section so that the angle of the beam is 0.5" away from hatch.